NS-51P680A12/NS-59P680A12

Connecting an antenna or cable TV (no box)

Notes

•If the signal level for a channel is weak, the picture may be distorted. Adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier.

•If the picture quality is good on some channels and poor on others, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider.

•If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.

•Many high-definition (HD) channels upscale standard-definition (SD) content. The picture displayed on your TV is still displayed as SD, thus the picture quality will not be as clear or crisp as it would be if the content was originally recorded in HD.

Connecting a DVD or Blu-ray player

Using HDMI (best)

To connect a DVD or Blu-ray player using HDMI:

1Turn off your TV and all connected equipment.

2Connect an HDMI cable (not included) between the HDMI IN 1(DVI) or HDMI IN 2 jack on the back of your TV and the HDMI OUT jack on the DVD or Blu-ray player.

Back of TV

To connect an antenna or cable TV (no box):

1Turn off your TV and all connected equipment.

2Connect a coaxial cable between the ANT IN jack on the back of your TV and the antenna or cable TV wall jack.

Back of TV

Coaxial cable

Outside antenna or cable TV wall jack (no box)

3Turn on your TV.

4Go through the setup wizard on page 20.

HDMI cable

DVD or Blu-ray player

3Turn on your TV, then turn on the DVD or Blu-ray player.

4Press INPUT one or more times to select HDMI 1/DVI or HDMI 2.

14

www.insigniaproducts.com