Installing a wall-mount bracket

Warning

This apparatus is intended to be supported by a UL

Listed wall-mount bracket.

To install a wall-mount bracket:

Warning

These servicing instructions are for use by qualified service personnel only. To reduce the risk of hazards, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

1If the stand is installed, remove the stand.

2Attach the wall-mount bracket to the back of your TV using four M8 screws (not included).

Note

The length of the wall-mount screws vary depending on the wall-mount bracket you purchased. See the instructions that came with the wall-mount bracket for screw lengths.

Warnings

•Make sure that you use M8 screws. Screws with other dimensions may cause damage to the inside of your TV.

•For wall mounts that do not comply with the VESA standard screw specifications, the length of the required screws may differ. Do not use screws that do not comply with the VESA standard screw specifications.

•Do not exceed a 15° tilt when mounting your TV.

TV components

Accessories

Make sure that the following accessories are provided in the packaging:

Accessories

Remote control with two

AAA batteries

Power cord

Ferrite core

M4 X L12 screws (4)

M4 X L8 screws (4)

Cleaning cloth

Important Information

Document and

Quick Setup Guide

Cleaning cloth

The cleaning cloth is for cleaning the TV screen only. Do not use the cleaning cloth to clean any other part of your TV.

www.insigniaproducts.com

5