Insignia
Setting up your boombox
Using the AC power adapter
To use the AC power adapter:1Make sure that your local AC power source matches the voltage shown on the plate located on the AC power adapter. If it does not, consult your dealer or service center.
2Insert the small connector at the end of the AC power adapter cable into the DC IN jack on the back of your boombox.
3Plug the AC power adapter into a wall power outlet.
Caution
To protect your boombox during thunderstorms, unplug the
AC power adapter from the AC power outlet.
Note
Only use the supplied AC power adapter, which has the following specifications: DC=12V 2A 
Unplug both the DC plug and the adapter when not in use.
The batteries are automatically bypassed when the AC power adapter is used.
Installing the batteries
To install the batteries:1Turn your boombox over, then open and remove the door to the battery compartment.
2Insert eight (8) “C” size batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.