Insignia NS-BBTCD01 manual Using a Bluetooth device, Selecting the audio source

NS-BBTCD01_14-0818_MAN_V3_ENG.fm Page 12 Saturday, August 9, 2014 1:18 PM

CD Boombox with Bluetooth

Selecting the audio source

To select the audio source:

•Press the Source button one or more times until the audio source you want appears on the LCD. You can select:

•AM—AM radio band

•FM—FM radio band

•CD—CD player

•—Paired Bluetooth device

•AUX—Device connected to the AUX jack.

Selecting the sound mode

You can select a sound (equalizer) mode to automatically adjust the sound for the type music you are playing.

To select the sound mode:

•Press the Sound button one or more times until the sound mode you want appears on the LCD. You can select JAZZ, POP, CLASSIC, ROCK, or FLAT.

Using a Bluetooth device

Pairing with a Bluetooth device

To pair with a Bluetooth device:

1On your boombox, press the Source button one or more times until the indicator appears of the LCD.

2Make sure that your Bluetooth device is turned on and within 33 feet (10 meters) of your boombox.

3On your boombox, press the (Bluetooth pairing) button. Your boombox enters pairing mode, and the Bluetooth LED blinks. Your boombox remains in pairing mode for 30 minutes or until it pairs with a Bluetooth device.

4On the Bluetooth device, start pairing mode, then select NS-BBTCD01. See the instructions that came with the device for information pairing.

5If you are asked for a password, enter 0000. When pairing is complete, the Bluetooth LED on your boombox lights solid.

6To disconnect from the paired Bluetooth device, press and hold the

(Bluetooth pairing) button on your boombox for three seconds. Your boombox disconnects from the Bluetooth device and enters pairing mode again.

12www.insigniaproducts.com