Setting up your boombox
Powering your boombox
Your boombox can be powered by either the included AC Adapter, or by using eight “C” sized alkaline batteries. Your boombox only operates on batteries if the AC adapter is unplugged.
Installing the batteries
To install the batteries:
1Open the battery compartment on the bottom of your boombox.
2Place eight “C” size alkaline batteries (not included) into the battery compartment. Make sure to match the + and - on the battery to the + and - signs in the battery compartment.
3Close the battery compartment until it clicks into place.
Caution
• When you replace the batteries, make sure that you use batteries of the same type and voltage. The batteries are “C” size alkaline.
• All batteries should be replaced at the same time.
• Dispose of used batteries by following your local hazardous waste regulations.
• If you don’t plan to use your boombox for an extended period of time, remove the batteries to prevent damage.
Note
BATT LOW will be shown on the display when the batteries are lower than 20% capacity.
Connecting the AC adapter
To connect the AC adapter:
1Plug the small connector at the end of the power cord into the DC IN jack on the back of your boombox.
2Plug the AC adapter into a 120/240V, 50/60Hz power outlet.
8www.insigniaproducts.com
