NS-BRDVD3-CA Blu-Ray Disc Player

Setting up your player

Connecting a TV using an HDMI cable (best)

Installing remote control batteries

To connect a TV using an HDMI cable:

• Connect an HDMI cable to the HDMI jack on

To install remote control batteries:

the back of your player and to the HDMI IN

jack on the TV.

1Remove the battery compartment cover.

2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment.

3Replace the battery compartment cover.

Notes

•Make sure that you insert the batteries correctly.

•Do not heat, open, or short-circuit batteries.

•Do not throw batteries into a fire.

•Do not mix different types of batteries or mix old and new batteries.

•Do not try to recharge non-rechargable batteries.

•If the remote control does not function correctly or if the operating range becomes reduced, replace the batteries.

TV

Back of player

Notes

•Only the HDMI is capable of 1080i/1080p video output and the highest definition audio codes.

•An HDMI cable carries both video and audio. If you want to use TV speakers, you do not need to make an audio connection. If you want to use an audio receiver, connect an HDMI cable between your player and the HDMI input jack on the receiver. Then connect a second HDMI cable between the HDMI output jack on the receiver and the HDMI input jack on the TV.

4

www.insigniaproducts.com