Insignia NS-BRHTIB Setting the parental control password, Turning dynamic range control on or off, Turning parental controls on or off, Selecting the digital audio output mode

			NS-BRHTIB Blu-ray Disc Home Theater System
Selecting the digital audio output mode			To turn dynamic range control on or off:
To select the digital audio output mode:			1 Press ENTER. The Settings menu opens.
1 Press ENTER. The Settings menu opens.			Network
				Au dio
Network	Au dio		Display	Digital Output	PCM
				Dynamic Range Control	Off
			Audio
Display
	Digital Output	PCM	Settings
Audio	Dynamic Range Control	Off	Language

Settings	Language	Parental
	Parental	System
	System

2Press or to select Audio. The Audio menu opens.

3Press , press or to select Digital Output, then press ENTER.

4Press or to select the digital output mode you want, then press ENTER. You can select:

•PCM—Sends mixed digital audio over the HDMI connection in 7.1CH PCM (if supported by the HDMI device) and the SPDIF connection in two-channel PCM format.

•Bitstream HD—Sends the original bitstream from the disc over the HDMI and SPDIF connections using highest quality possible. HDMI has the higher quality capabilities with advanced audio codecs like TrueHD and DTS-HD. Blu-ray audio is limited to the soundtrack for the main movie (no PIP audio and no effects audio).

•Bitstream Legacy—Sends the original bitstream from the disc over the HDMI and SPDIF connections using legacy audio formats. Blu-ray audio is limited to the soundtrack for the main movie (no PIP audio and no effects audio).

•Bitstream mixed—Sends mixed and encoded Blu-ray audio streams in a single bitstream. This mode is primarily intended for use with SPDIF 5.1CH receivers to produce mixed Blu-ray audio in surround sound.

5Press to go to the previous menu.

2Press or to select Audio. The Audio menu opens.

3Press , press or to select Dynamic Range Control, then press ENTER.

4Press or to select On or Off.

5Press to go to the previous menu.

Setting the parental control password

To set the parental control password:

1Press ENTER. The Settings menu opens.

	Audio	Parental
	Language	Parental Country	USA
	Parental	Parental Control	On
		Parental Level	8[Audlt]
Settings
		Parental Password
	System

Network

Display

2Press or to select Parental. The Parental menu opens.

3Press . The password screen opens.

4Enter the default password (0000). If you forget your password, reset your player to the factory defaults. The password will be reset to 0000. For more information, see “Resetting settings to the factory defaults” on page 17.

5Press to go to the previous menu.

Turning dynamic range control on or off

Dynamic range control is only active when a Dolby Digital signal is detected.

When Dynamic Range Control is set to Off, movie soundtracks are played with the standard dynamic range.

When movie soundtracks are played at low volume or from smaller speakers, you can set Dynamic Range Control to On. Your player applies appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

6Press or to select Parental Password, then press ENTER.

7Enter your new password.

Turning parental controls on or off

To turn parental controls on or off:

1Press ENTER. The Settings menu opens.

	Audio	Parental
	Language	Parental Country	USA
	Parental	Parental Control	On
		Parental Level	8[Audlt]
Settings
		Parental Password
	System

Network

Display

14 www.insigniaproducts.com