Insignia NS-CL1112 Making connections, Setting the clock, Connecting the AC adapter, CLK SET, CLK SET, CLK SET, CLK SET, TUNING/SKIP, TUNING/SKIP, TUNING/SKIP, To set the clock:

Insignia NS-CL1112 Clock Radio with iPod Dock

3Close the battery compartment cover.

Warnings

•Do not recharge, short, disassemble, or heat the batteries, or dispose of in a fire.

•Dispose of battery in the proper manner, according to federal, state, and local regulations.

•Remove the batteries when the charge is depleted.

•Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

Making connections

Connecting the AC adapter

Make sure that the AC power outlet matches the AC adapter’s power specifications (100-240 V ~ 50-60 Hz) prior to plugging in the adapter.

To connect the AC adapter:

1Plug the small DC power connector into the AC adapter jack on the back of your clock radio.

2Plug the AC adapter into an AC power outlet.

Setting the clock

To set the clock:

1In standby mode, press and hold the CLK SET button on the top of your clock radio for two seconds. The hour format (12 or 24) is displayed on the LCD.

2Turn the TUNING/SKIP knob to change the format between 12 and 24.

3Press the CLK SET button again. The hour setting starts blinking.

4Turn the TUNING/SKIP knob to change the hour setting.

5Press the CLK SET button again. The minute setting starts blinking.

6Turn the TUNING/SKIP knob to change the minute setting, then press the CLK SET button to store the setting.

Note

If no button is pressed for ten seconds, the clock radio exits clock setting mode without storing the setting.

The clock is displayed in standby mode. To view the clock in radio mode, press and hold CLK SET for two seconds. Press it again to return to the normal display.

10www.insigniaproducts.com