Insignia NS-CL1112 Clock Radio with iPod Dock

9Press the ALARM1 or ALARM2 button repeatedly. The source will cycle through iPod, Radio (FM/AM), BUZZER, and OFF.

To turn the alarm on or off:

1If the alarm is off, press the ALARM1 or ALARM2 button to turn on the alarm. The ALARM1 or ALARM2 flag, and the source icon (iPod®, RADIO, or BUZZER), appear on the display and the alarm time appears briefly.

2If the alarm is on, press any button (except SNOOZE/DIMMER) to turn off the alarm.

3If you don not want to set the alarm for the next day, press ALARM1 or ALARM2 until the “ALARM1” or “ALARM2” flag disappears from the display.

To use the alarm:

When the alarm sounds, the ALARM and WAKE-TOflags flash on the display.

1Press the STANDBY/ON button to reset the alarm for the same time the following day.

2Press the SNOOZE/DIMMER button to stop the alarm for 9~10 minutes. You can use the SNOOZE/DIMMER button five times.

Notes

•The ALARM and SNOOZE flags remain on while in snooze mode.

•The volume level of the alarm will increase from the minimum level until the level selected by user is reached (the default volume is 16, the maximum volume is 32).

•If the selected source is iPod® and no iPod® is connected, the alarm will switch to Buzzer automatically.

To use the sleep timer:

1When listening to the radio or your iPod®, press the SLEEP button repeatedly to set the sleep timer. Settings include 120, 90, 75, 60, 45, 30, or 15 minutes. The radio or iPod® automatically turns off after the selected interval.

2To stop listening at any time, press the STANDBY/ON button.

Notes

•When the display changes back to show the real time, pressing the SLEEP button once shows the sleep time remaining. Pressing it again changes the sleep time to the next lowest increment.

•The clock radio has an independent volume setting for sleep mode, so you can adjust the sleeping volume without affecting the alarm volume.

12www.insigniaproducts.com