Insignia
Problem | Cause/Solution |
|
|
No sound | • Make sure that the volume level is set correctly. |
from the |
|
speakers |
|
|
|
Static or | • Make sure that the station is tuned correctly and that the station |
noise when | has a good signal. |
playing the | • Try another station. |
radio | • If you are playing an AM station, rotate the antenna to improve the |
| reception. |
| • If you are playing an FM station, extend the antenna wire to |
| improve the reception. |
|
|
The sound is | • Make sure that the volume level is not set too high. |
distorted | • Make sure that the material on the sound source is not distorted. |
| Try a different external sound source. |
|
|
The clock | This is normal. |
radio gets |
|
warm after |
|
extended play |
|
at high |
|
volume levels |
|
|
|
Maintaining
Cleaning your clock radio
To clean your clock radio, follow these guidelines:•Use a soft, clean cloth moistened with plain,
•Do not let liquid drip into the inside of your clock radio.
•For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry your clock radio immediately afterwards with a clean cloth. Do not use abrasive clothes, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.
Specifications
Specifications are subject to change without notice.
Power requirement | AC - 100~240 V, 50~60 Hz |
| DC - 2 x AA batteries for tuner memory backup |
|
|
Power consumption | 18 Watts |
|
|
www.insigniaproducts.com | 17 |