Insignia
1Make sure the clock radio is turned off
2Plug one end of the auxiliary
3Plug the other end of the cord into the
4Turn on the radio.
5Press FUNCTION one or more times until
6Use the controls on the audio device to control playback.
Setting the clock and the alarm
To set the clock:1Press and hold TIME SET. The time blinks on the display.
2Press MIN (minute) to set the minute and HR (hour) to set the hour. Make sure that you set the correct AM/PM setting.
3Press TIME SET again. The clock is set.
Note
Press the TIME SET button to display the clock and current operation mode.
If no key is pressed within 10 seconds, the radio returns to the previous operation mode automatically.
To set the alarm:1Press and hold ALARM 1 or ALARM 2 (depending on the alarm mode you want) until the display blinks.
2Press MIN (minute) to set the alarm minute and HR (hour) to set the alarm hour. Make sure to set AM/PM correctly.
3Briefly press ALARM 1 or ALARM 2 again to save the setting. The display stops blinking.
4To cancel the alarm, press ALARM 1 or ALARM 2 until the alarm indicator disappears from the display.
To set the alarm to buzzer, radio, or iPod®:1Briefly press ALARM 1 or ALARM 2 (depending on the alarm mode you want). The time is displayed.