Insignia
Setting up your clock radio
Using the AC power adapter
To use the AC power adapter:1Insert the small connector at the end of the AC power adapter cable into the DC IN jack on the back of your clock radio.
2Plug the AC power adapter into a wall power outlet.
Note
Only use the supplied AC power adapter, which has the following specifications: DC=6V 1A 
Unplug both the DC plug and the adapter when not in use.
The batteries are automatically disconnected when the AC power adapter is used.
Installing the batteries
To install the batteries:1Turn your clock radio over, then open and remove the door to the battery compartment.
2Insert four (4) AA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.