Insignia 12 Megapixel Camera

3Press / or / to highlight Focus Light, then press OK/DISP to open the submenu.

4Press / or / to select On or Off, then press OK/DISP.

5Press MENU again to close the menu.

Setting the metering function

This feature controls exposure metering in recording still images.

Note

The metering function can only be set when Simple mode is set to Off.

To set the metering function:

1Slide the MODE switch to switch to Photo mode.

2Press MENU to open the Record menu.

12M

3Press / or / to highlight Metering, then press OK/DISP to open the submenu.

4Press / or / to select the setting you want, then press OK/DISP. You can select:

•Center—Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.

•Multi—Divides the image into several zones and measures the light in each zone for a balanced exposure reading. Your camera determines shooting conditions according to the measured lighting pattern, and makes exposure settings accordingly.

•Spot—Locks the spot metering frame to the center of the LCD.

An icon that corresponds to the metering mode selected will appear on the left side of the LCD.

Metering icon

5Press MENU again to close the menu.

Turning burst mode on or off

Burst mode allows for continuous shooting of photos. Burst mode is not available in Video mode.

Note

The burst mode setting can only be adjusted when

Simple mode is set to Off.

To turn burst mode on or off:

1Slide the MODE switch to switch to Photo mode.

2Press MENU to open the Record menu.

12M

www.insigniaproducts.com

17