Setting the date and time
Note
•The date and time can only be set when Simple mode is set to Off.
Turning Power Save on or off
Note
The power save function can only be accessed when
Simple mode is set to Off.
To set the date and time:
1Turn on your camera.
2Slide the MODE switch to switch to Photo 
or Video 
mode.
3Press MENU. The
4Press 
/
or 
/ 
to select the 
(setup) tab. The Setup menu opens.
5Press 
/
or 
/
to highlight Date & Time, then press 
/ 
or OK/DISP to open the date and time screen.
6Press 
/
or 
/
to set the hour, then press
/ 
to move to the minutes field.
Tip
You can press and hold a navigation button to change the values continuously.
7Repeat Step 4 to set the minutes, select AM or PM, and enter the year, month, and day.
Note
If the battery is removed for longer than 48 hours, the date and time must be reset.
8Press MENU to close the menu.
The Power Save function automatically turns off your camera after being idle for a specified period of time to save power.
This function is turned off when:
•Recording and playing a video
•Erasing or copying files
•Using the USB connector
Caution
Connecting your camera to a computer using the USB connector will not recharge your camera's battery or enhance battery life. Make sure that you disconnect your camera from the computer and power down your camera when you are finished transferring files to your computer.
To turn Power Save on or off:
1Turn on your camera.
2Slide the MODE switch to switch to Photo 
or Video 
mode.
3Press MENU. The
4Press 
/
or 
/
to select the 
(setup) tab. The Setup menu opens.
5Press 
/
or 
/
to highlight Power Save, then press 
/
or OK/DISP to open the submenu.
6Press 
/
or 
/
to select On or Off, then press OK/DISP.
7Press MENU to close the menu.
22 | www.insigniaproducts.com |