NS-DSC1112SL/NS-DSC1112SL-CN Insignia 12 Megapixel Camera

Setting up your camera

Charging the battery

To charge the battery:

1Connect the battery charger to a power outlet.

2Insert the battery into the charging slot. Make sure that the + and – on the battery align with the + and – in the charging slot.

The charger LED lights orange while the battery is charging. When the battery is fully charged, the charger LED lights green.

Installing the battery

Make sure that you read and follow the battery cautions in “Battery information” on page 1.

To install the battery:

1Make sure your camera is turned off.

2Slide the cover in the direction of the arrow, then lift the cover away from the battery compartment.

Attaching the wrist strap

To attach the wrist strap:

1Insert the short loop on the strap through the strap ring.

2Thread the large loop through the short loop, then pull tight.

Understanding camera memory and file names

Internal memory

Your camera is equipped with 32 MB of internal memory. Approximately 20 MB of the internal memory is available for photo and video storage. If no memory card is inserted in the memory card compartment, all photos and videos captured are automatically stored in the internal memory.

External memory

Your camera supports SD cards up to 4 GB and SDHC cards up to 32 GB. If there is a memory card inserted in the card slot, your camera automatically saves all photos and videos in the memory card. The icon indicates your camera is using the memory card.

File names

3Insert the battery into the battery compartment. Make sure that the + and – symbols on the battery line up with the + and – symbols on your camera.

4Close the battery compartment cover, then slide the cover in the direction of the arrow to lock it in place.

File names begin with “DSCI” and are followed by a four-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created.

If the highest folder number is 999 and the highest file number exceeds 9999, your camera will display the warning message “Folder cannot be created.” When this happens, insert in a new memory card.

Caution

Do not change the folder and file names in your camera’s internal memory or the memory card using your PC. Your camera may be unable to play back the files.

4

www.insigniaproducts.com