Insignia NS-F14TV 14" Flat Panel TV

Using your TV

Turning your TV on and off

To turn your TV on and off:

1Plug the power cord into an electrical outlet.

2Press the Power button on your remote control.

Note

The power indicator turns off when your TV is active. The power indicator turns red when the your TV is in Standby mode. When your TV has a blue screen or is displaying a screen saver, your TV goes into standby mode after five minutes.

Selecting the TV signal type

To select the TV signal type:

•Press the DTV/ATV button. You can select digital TV (DTV) or analog TV (ATV).

Changing TV channels

To change TV channels:

•Press the CH or CH button on your remote control or TV.

To enter channel numbers and date settings directly:

•Analog TV–To enter a two-digit channel number, press the two numbers within two seconds of each other. For example, to select channel 12, press 1 then press 2. The channel changes after two seconds. If you enter a 0 before you enter the 1 and 2, the channel changes immediately.

•Digital TV–To enter a channel number, enter the main channel number, press the • button, then, within four seconds, enter the subchannel number. For example, to select channel 38-12, press 3, 8, •, 1, then 2. If you press the • button after you press 2, the channel changes immediately.

18www.insignia-products.com