Insignia NS-F14TV manual 23

Insignia NS-F14TV 14" Flat Panel TV

Menu	Option
SOUND	VOLUME–Increases and decreases the
	volume.
	TREBLE–Adjusts the treble.
	BASS–Adjusts the bass.
	BALANCE–Adjusts the balance between the
	right and left speaker jacks.
	SURROUND–Turns surround sound on or off.
	STEREO–Selects the sound type. You can
	select NORMAL, ENHANCED, or MONO.
TUNING	CHANNEL–Selects the TV channel. Press
	the channel buttons on the remote control or
	TV or use the number buttons to enter the
	channel number.
	DELETE CH–Determines whether the current
	channel is stored in the channel list. If you
	select YES, the channel is skipped when you
	press the channel buttons. If you select NO,
	the channel is not skipped when you press the
	channel buttons.
	LABEL–Lets you add a five-character
	description to a channel number. For more
	information, see “Adding a channel label” on
	page 19.
	SOURCE–Selects the source of the TV
	signal. Select AIR for a VHF/UHF antenna.
	Select CABLE for a cable TV connection.
	AUDIO–Selects the audio channel. You can
	select MAIN, SUB1, SUB2, or SUB3. (This
	option only works in DIGITAL mode.)
	AUTO SEARCH–Scans the channels for
	available signals, then creates and stores a
	channel list. If you are using a VHF/UHF
	antenna, make sure that you select AIR in the
	SOURCE option. If you are using cable TV,
	make sure that you select CABLE in the
	SOURCE option.
	Notes: Press the MENU button to stop
	scanning. If you are in DIGITAL mode and
	press the MENU button to stop scanning, the
	channels found during the scan are not
	stored.
	After scanning for channels in DIGITAL mode:
	• If a scrambled channel is displayed, a
	password is required to see the channel.
	• If NO VIDEO appears, the channel is an
	audio channel only.
	• If NO SIGNAL appears, there is no
	signal for the channel.

www.insignia-products.com23