Installing remote control batteries
Warning
Do not throw the batteries into fire. Dispose of used batteries as hazardous waste.
Caution
Do not drop or disassemble the remote control. Do not get the remote control wet.
To install batteries in the remote control:
1Remove the battery cover.
2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – marks inside the battery compartment.
3Replace the battery cover.
Note
When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.
Setting up your TV
Connecting an antenna or direct cable
VHFUHF
Mixer (not included)
Antenna jack
Power cord
To connect an antenna or direct cable:
1Plug one end of a coaxial cable into your antenna or cable wall jack.
2Plug the other end of the cable into the antenna jack on the back of your TV.
Connecting a cable or satellite receiver
To connect a cable converter box or satellite receiver:
1Connect a coaxial cable from your cable or satellite signal source to the IN jack on cable converter box or satellite receiver.
2Plug a coaxial cable into the OUT jack on your cable converter box or satellite receiver, then plug the other end of the cable into the antenna jack on the back of your TV.
Insignia
Connecting a standard A/V device
Your TV has two set of standard A/V jacks. One set is on the back of your TV. The other set is on the left side of your TV.
To connect a standard A/V device to the back A/V jacks:
3 | 5 |
| 7 | 8 |
4 |
| 6 | ||
|
| |||
|
|
|
|
1
2
No. Component
1DVD player
2VCR
3AUDIO R OUT
4AUDIO L OUT
5VIDEO OUT
6VIDEO2 IN
7AUDIO L IN
8AUDIO R IN
1Plug the video (yellow) connector on a standard A/V cable into the video out jack on the external device, then connect the other video (yellow) connector into the VIDEO IN jack on the back of your TV.
2Plug the left audio (white) connector on a standard A/V cable into the left audio out jack on the external device, then connect the other left audio (white) connector into the AUDIO IN L (left) jack on the back of your TV.
3Plug the right audio (red) connector on a standard A/V cable into the right audio jack on the external device, then connect the other right audio (red) connector into the AUDIO IN R (right) jack on the back of your
TV.
6 |