Insignia
Selecting the TV signal source | 3 Press VOL+ or VOL– to select the channel |
| icon . The Channel menu opens. |
To select the TV signal source:
1 Press MENU to open the
2Press VOL+ or VOL– to select the channel
icon . The Channel menu opens.
4 Press CH+ to select Auto Program.
5 Press VOL+ or VOL– to start the scan. Your TV scans for available channels, and stores the channel information in memory.
|
|
| Adding or deleting channels |
3 | Press CH+ or CH– to select Channel | ||
|
| System. | If a channel was skipped when your TV |
4 | Press VOL+ or VOL– to select AUTO | memorized the channels because the signal was | |
|
| (recommended) or NTSC. | weak, you can add the channel to the channel |
|
|
| list. You can also delete a channel from memory. |
Selecting the channel system
1Press MENU to open the
2Press VOL+ or VOL– to select the channel icon . The Channel menu opens.
3Press CH+ or CH– to select Antenna.
4Press VOL+ or VOL– to select TV or CATV.
Memorizing channels
After you set up your TV, you need to scan for channels in your area that have a signal. When your press the CH+ or
To memorize channels:
1Make sure that you have selected the TV signal source. For more information, see “Selecting the TV signal source” on page 9.
2Press MENU to open the
To add or delete channels:
1Tune to the channel you want to add or delete. If you want to add a channel, use the number buttons to enter the channel button. If you want to delete a channel press the CH+ or CH– button or use the number buttons to select the channel.
2Press MENU to open the
3Press VOL+ or VOL– to select the channel icon . The Channel menu opens.
4Press CH+ or CH– to select Skip.
5Press VOL+ or VOL– to add or delete the channel.
9 |