Insignia NS-F20TV Television

Information about USA channel numbering

3 Press or to enter the Picture menu.

•The ATSC PSIP channel uses a two part channel number which includes:

• a major channel number

• a minor channel number

Note

Example: Channel 5-1. The “5” is the major channel number and the “1” is the minor channel number.

•In the US, in most locations the major channel number is the same for both analog and digital channels (It is equal to the NTSC channel number for existing broadcasters.)

•In the US, a minor channel number of zero is used for a broadcaster's analog channel.

Channel Numbering Example

•Original NTSC channels for Des Moines, IA: 5, 8, 11, 13, and 17.

•Possible NTSC + ATSC channels for Des Moines, IA: 5-0, 8-0, 11-0, 13-0, and 17-0 (channel numbers for existing analog channels) and 5-1, 5-2, 8-1, 8-2, 8-3, 8-4, and 13-1 (channel numbers for digital channels).

Controlling the sound

Using the VOL+ and VOL- buttons

Press:

•VOL+ to increase the volume.

•VOL- to decrease the volume.

Using the MUTE button

To mute the sound:

•Press MUTE on the remote.

To resume the sound:

•Press MUTE on the remote. -OR-

Press VOL+.

Note

If you mute the sound, the color of VOLUME displayed on the screen turns red. After resuming the sound, the color of VOLUME displayed on the screen turns green.

Adjusting the picture

To adjust the picture:

1With the television turned on, press MENU to display the main menu.

4Press or to select a setting to adjust.

5Press or to adjust the setting.

Setting

Press

Press

 

 

 

Contrast

weaker

stronger

 

 

 

Brightness

darker

lighter

 

 

 

Color

paler

deeper

 

 

 

Tint

purplish

greenish

 

 

 

Sharpness

softer

sharper

 

 

 

Selecting a picture mode

There are three preset picture modes (Standard, Dynamic, and Soft) and one user-set picture mode (Personal).

To select a picture mode:

1Press PICTURE on the remote control.

2Select from one of the following:

•STANDARD—Select for a normal picture.

•DYNAMIC—Select for a bright and dynamic picture.

•SOFT—Select for a finely detailed picture.

•PERSONAL—Select to create your own picture mode.

Changing picture size

You can change the picture size (aspect ratio) according to your video signal type or personal preference. This can only be done in DTV mode when the video signal type is in 16:9 format.

To change the picture size:

Press ZOOM to select the desired picture size (aspect ratio). You can select between NORMAL and ZOOM.

Using the clock

To enter the clock menu:

1With the television turned on, press MENU to display the main menu.

2 Press or to select PICTURE.

2 Press or to select CLOCK.

12

www.insignia-products.com