Insignia
3 Replace the battery cover. | Setting up your television |
|
Unpacking your television
Your box includes the following:
• One television
• One remote control
• This User Guide
Warning
•Do not try to recharge alkaline batteries as they are not intended to be recharged.
•Use only the size and type of batteries specified. Do not mix different types of batteries together or old batteries with fresh ones.
•Remove the batteries when the remote control will not be used for a long period of time or when the batteries are worn out.
•Do not throw the batteries into a fire. Dispose of used batteries per local regulations.
•Do not drop, dampen, or disassemble the remote control.
Using the remote control
Locating the television
Set up the television in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Connecting your television to an antenna, cable television, or satellite dish
Wall antenna | Bronze Wire | ||||
|
|
| Antenna Input | ||
socket or cable |
|
|
|
|
|
or satellite feed | RF Coaxial Cable (75 ohm) |
|
|
| |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
Note
Antenna users: Optimum color reception requires a good signal and generally means that an outdoor antenna must be used. The exact type and position of the antenna depends upon your particular area.
Caution
•We recommend that a
•The antenna cable should not be bundled with the power cord.
•If the antenna cannot be installed correctly, contact your dealer for assistance.
15 feet (5 m)
Note
•The remote control may not operate if there is an obstacle between the television and the remote control.
•The remote control may not operate the television correctly when direct sunlight, an incandescent or fluorescent lamp, or any other strong light shines on the television’s remote sensor.
Connecting video and audio equipment
This television provides two groups of AV input terminals and one group of component input terminals for connecting to a VCR, a DVD player a video game console, or other video equipment.
Before connecting your equipment, refer to the owner's manual of the equipment to be connected.
Connecting using the side AV input terminals
The side AV terminals are easy to access and should be used for equipment that you connect and disconnect frequently, such as a camcorder or portable DVD player.
To Video output
Signal 
To Audio
Y = Yellow (video)outputs
W = White (audio L)
R = Red (audio R)
To connect using the side AV input terminals:
1Connect the audio and video cables between the Audio (L,R) and Video terminals on the television and the video equipment.
7 |