Specifications

General

Power requirements

AC 120 V, 60 Hz

 

 

Power consumption

50 Watts

 

 

Dimensions

17.72 × 16.14 × 12.99 inches

 

(45 × 41 × 33 cm)

 

 

Weight

5.84 lbs. (2.65 Kg)

 

 

Speaker dimensions

 

 

 

Front

3.54 × 3.94 × 4.33 inches

 

(9 × 10 × 11 cm)

 

 

Center

3.54 × 3.94 × 4.33 inches

 

(9 × 10 × 11 cm)

 

 

Rear

3.54 × 3.94 × 4.33 inches

 

(9 × 10 × 11 cm)

 

 

Subwoofer

7.09 × 9.65 × 10.43 inches

 

(18 × 24.5 × 26.5 cm)

 

 

DVD receiver

 

 

 

Pickup

Semiconductor laser (wavelength

 

650 nm)

 

 

Signal system

NTSC

 

 

Video signal

>480 lines

horizontal resolution

 

 

 

Video signal-to-noise

>60 dB (DVD)

ratio

 

 

 

Audio frequency

DVD (PCM): 20 Hz ~ 20 kHz (±1.0 dB)

response (2 channel

CD: 20 Hz ~ 20 kHz (±1.0 dB)

stereo)

 

 

 

Audio signal-to-noise

>80 dB (PCM)

ratio

 

 

 

Total harmonic

<0.2% (PCM)

distortion

 

 

 

Dynamic range

DVD (PCM): >85 dB (EIAJ, 2 kHz,

 

-60 dBfs)

 

CD: >85 dB (EIAJ)

 

 

Video output

 

 

 

Component video

Y: 0.7 Vp-p (75 ohm)

output

Pb: 0.7 Vp-p (75 ohm)

 

Pr: 0.7 Vp-p (75 ohm)

 

 

Video output

1.0 Vp-p (75 ohm)

 

 

S-Video output

Y: 0.7 Vp-p (75 ohm)

 

C: 0.886 Vp-p (75 ohm)

 

 

Audio power output

 

 

 

Front

30 W + 30 W (4 ohms at 1 kHz,

 

THD 10%)

 

 

Subwoofer

50 W (8 ohms at 80 kHz, THD 10%)

 

 

Center (surround)

30 W (4 ohms at 1 kHz, THD 10%)

 

 

Rear (surround)

30 W + 30 W (4 ohms at 1 kHz,

 

THD 10%)

Design and specifications are subject to change without notice.

Legal notices

FCC compliance statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired operation.

Copyright

© 2006 Insignia. Insignia and the Insignia logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to change without notice or obligation.

18

www.insignia-products.com