Insignia
Connecting the power cord
To prepare your shelf system for use:1Make sure that your local AC power source matches the voltage shown on the plate located inside the battery compartment. If it does not, consult your dealer or service center.
2Plug the power cord into an AC power outlet.
3Press the POWER button to turn on your shelf system. Press the POWER button again to turn off your shelf system.
To completely turn off the shelf system, unplug the power cord from the AC power outlet.
Caution
To protect your shelf system, unplug the power cord from the AC power outlet during heavy thunderstorms.
Using your shelf system
Playing the radio
To play the radio:1Press the POWER button to turn on the shelf system.
2Press the FUNCTION button on the front panel, or the FM/AM button on the remote control, to select the radio.
3Press the FUNCTION button or the FM/AM button again to select the band you want to listen to. Press MO/ST to select mono or stereo mode.
4To toggle between Analog radio and HD radio, press the A/D button. While in HD radio mode, press HD CHAN to switch to different channels. Also while in HD radio mode, press DISPLAY to display information about the current station, including channel name, artist, title, program type, and service data.
5Press TU+ or TU– to tune the radio up or down by steps.
6To save the current frequency, press the SAVE button. To save other frequencies, press the number buttons to go to a specific preset number, then press the T/F button to input the frequency. For example, to save 99.3 MHz to the 18th preset, press 1, then 8 to select the preset, then press the T/F button to input 993 and press the SAVE button to save it.
7To tune to a preset station, press the number buttons to go to a specific preset, or press CH+ or CH– to go to the next or previous preset station.
14www.insignia-products.com