Insignia NS-HD2114 Troubleshooting, S, O--:, CLOCK, 0,4,5, CLOCK, CLOCK, 0,5,0,0, Problem, Solution, Possible cause, To set the sleep timer:

Insignia NS-HD2114 DVD Shelf System

To set the sleep timer:

1Press the CLOCK button on the remote control repeatedly to select S----.

2Enter the sleep timer interval by pressing the number buttons. For example, if you want the player to turn off after 45 minutes, press 0,4,5. The player will turn off automatically after 45 minutes.

To set the player to turn on automatically:

1Press the CLOCK button on the remote control repeatedly to select O--:--.

2Enter the turn-on time by pressing the number buttons. For example, if you want the player to turn on at 5:00PM, press the CLOCK button to change the display to PM, then press 0,5,0,0. The player saves the setting automatically.

Troubleshooting

Caution

Do not try to repair the shelf system yourself. Doing so will invalidate your warranty.

Problem	Possible cause	Solution
No power.	AC plug not fully inserted in the	Make sure the AC plug is fully
	power outlet.	inserted in the power outlet.
The remote	Low batteries.	Replace the batteries with new
control does not		ones.
work.
	The remote controller is not	Aim the remote control at the shelf
	aimed at the shelf system.	system.
No picture.	Bad connections.	Reconnect the system using the
		illustrations at the beginning of this
		User Guide.
	Power cord not securely	Connect the power cord.
	connected.
	TV not set to video mode	Set the TV to video mode.
	The scan setting of the shelf	Reset the scanning mode.
	system does not match the TV.
The disc does	The disc was incorrectly	Reinsert the disc with the label side
not play.	inserted.	up.
	The disc is defective.	Try another disc.
	The disc tray is not closed.	Close the disc tray.
	There is condensation in the	Remove the disc and leave the
	disc compartment.	cover open for about an hour in a
		dry environment.

www.insignia-products.com25