Insignia NS-HD2114 DVD Shelf System

8To tune directly to a specific frequency, press T/F, then input the frequency with the number buttons.

9Press SEARCH to automatically search for stations in the selected band, from the lowest frequency to the highest. The radio saves up to 60 of the stations found. Press SEARCH again to stop searching.

10Press SEEK UP or SEEK DOWN to tune to the next higher or lower active frequency.

11Adjust the antenna.

•For FM listening, pull out the antenna and adjust it for the best signal.

•For AM listening, rotate the player for the best signal (it has a built-in antenna).

Note

The Stereo indicator will appear when a stereo station is tuned in and the signal is strong enough. (For AM, stereo is only available in HD radio mode.

12 Adjust the sound level with the VOLUME control.

13 To turn the radio off, press the POWER button.

When the shelf system is turned off, it automatically remembers the last station.

Playing a CD

The player can play audio discs, including CDs and CD-Rs.

Note

CD-Rs must be finalized to play in this CD player.

To play a CD:

1Press the POWER button to turn on the shelf system.

2Press the OPEN/CLOSE button on the remote control, or the EJECT button on the player, to open the disc tray.

3Place a disc, with the label side up, on the tray, then press the OPEN/CLOSE button on the remote control, or the EJECT button on the player to close the disc tray. The disc begins playing automatically.

4Press the PLAY/PAUSE button to start pause playback. To

resume playback, press the PLAY/PAUSE button again.

5Adjust the sound level with the VOLUME control knob (on the player) or with the VOL+/VOL- buttons on the remote control.

6Press the STOP button to stop the CD playback.

www.insignia-products.com15