No converter/descrambler box
To connect cable TV without a converter/descrambler box:
1Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV.
2Connect the other end of the cable to the cable TV wall outlet.
With converter/descrambler box
If your cable box descrambles only some channels (such as premium channels), you need a
To connect cable TV with a converter/descrambler box:
•Use the following illustration as a guide to connect a converter/descrambler box.
Set the RF switch to the A position to tune to unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls.
| RF switch |
|
|
|
|
| ||||
| A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Out |
|
|
|
| In |
| ||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| |
TV |
|
|
|
|
|
|
|
Cable converter/descrambler box
Connecting cable TV via a cable TV box
1Connect the incoming cable from the cable wall jack to the
2Depending on the jacks available on the cable box, connect a cable from the outgoing jacks on the cable box to the corresponding jacks on the back of your TV. The connection can be to the
Back of TV
Cable box
HDMI
Video or
Component
3If you use a component video,
Connecting satellite TV via a satellite TV box
To connect satellite TV:
1Connect the incoming cable from the satellite wall jack to the
2Depending on the jacks available on the satellite TV receiver
Back of TV
Satellite receiver
HDMI
Video or
Component
3If you use a component video,
10 | www.insigniaproducts.com |