2Insert two AA batteries into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.

3Replace the battery cover.

Cautions

•Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.

•Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.

•Make sure that batteries are disposed of correctly. Do not burn or incinerate.

Notes

•Do not mix batteries of different types.

•Do not mix old and new batteries.

•Remove batteries when the charge is depleted.

•If the remote control is not going to be used for an extended period of time, remove the batteries.

Aiming the remote control

To aim the remote control:

•Point the remote control towards the remote sensor on the front of your TV.

Notes

•Do not expose the remote control to shock or liquids.

•Do not use the remote control in an area with high humidity.

•Do not place the remote control in direct sunlight.

•Do not place objects, such as furniture, between the remote control and the remote sensor.

•The remote control may not work if direct sunlight or bright light shines on the remote sensor. Either move your TV or change the angle at which you use the remote control.

Using the remote control holder

Your TV comes with a remote control holder you can put the remote control in when you are not using it. You can put the holder on a table or mount it on a wall.

Screws

Tape

Tips

•Different types of walls may require different types of screws. If you want to wall mount the remote control holder, make sure that you use the correct screws for the type of wall. (Screws are not provided.)

•The remote control holder is shipped with separate adhesive tape for wall mounting. This tape may not work with all types of walls. Make sure that you use the correct tape for the type of wall.

Programming a universal remote control to work with your TV

You can operate your Insignia TV with a new or existing universal remote control.

To program a universal remote control:

1Find the code for your universal remote control by identifying its model (or your set-top box’s remote control manufacturer and model) on the charts below, then making note of the numbered code below it. You will use the numbered code to program your remote control to work with your Insignia TV.

Insignia TV codes for universal remote controls

(for all Insignia TVs manufactured after Jan. 1, 2007)

Universal remote control manufacturers and models

Philips PHDVD5,

RCA

One for All

Sony

 

PH5DSS,

RCU807

URC-6690

RM-VL600

 

PMDVR8, PDVR8

 

 

 

 

115

135

0464

8043

 

 

 

 

 

 

 

 

Set-top box manufacturers and models

 

Comcast

Dish Network

Motorola

TIVO

DirectTV

M1057

VIP508, VIP622

DRC800

Series 3, HD

RC23

 

 

 

 

 

0463

720

0463

0091

10463

 

 

 

 

 

8

www.insigniaproducts.com