Problem

Poor picture

Horizontal dotted line

“Ghost” or double image

Remote control does not work

Snowy picture or noise

VGA picture is not stable or synchronized

No output from one of the speakers Control buttons do not work

After images appear

Picture has a few bright or dark dots

Solution

•Make sure that the room is not too bright. Light reflecting off the screen can make the picture difficult to see.

•If an S-VHS camera or a camcorder is connected while another connected device is turned on, the picture may be poor. Turn off one or more devices.

•Your TV may be too close to another electrical device, such as a hair dryer or neon light. Turn off the device or move your TV.

•This may be caused by obstructions to the antenna, such as high-rise buildings or hills. Use of a highly directional antenna may improve the picture quality.

•Press TV (not the color button)

•Replace the batteries. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment.

•Clean the remote sensor on the front of your TV.

•Bright or fluorescent lighting may interfere with the remote control signal. Turn off the light or move your TV.

•Make sure that the A/V and antenna cables are connected correctly and securely.

•Make sure that you have selected the correct VGA mode on your computer.

•Adjust the balance in the Audio menu.

•Make sure that the Button Lock option is set to Off. For more information, see “Locking control buttons” on page 27.

•Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.

•Do not display a still image, such as a logo, game, or computer image, for an extended period of time. This can cause a permanent after-image to be burned into the screen. This type of damage is not covered by your warranty.

•A few bright or dark dots on an LCD screen is normal. It does not affect the operation of this TV.

Specifications

Design and specifications are subject to change without notice.

Analog standard

NTSC

Digital standard

ATSC, 8-VSB, Clear-QAM

Screen

NS-L42X-10A: 42”

 

NS-L46X-10A: 46”

 

 

Channel coverage

VHF: 2-13

 

UHF: 14-69

 

CATV: Mid band - A-8 ~ A-1, A ~ I

 

Super band - J ~ W

 

Hyper band - AA ~ ZZ, AAA, BBB

 

Ultra band - 65 ~ 94, 100 ~ 135

Power source

NS-L42X-10A: AC 120 V ~ 50/60 Hz

 

NS-L46X-10A: AC 120 V ~ 50/60 Hz

 

 

Power consumption

NS-L42X-10A: 220 W with TV on

 

NS-L46X-10A: 300 W with TV on

 

<1 W in standby mode

Audio power

12 W + 12 W internal speaker

S-Video input (2)

Y: 1 V (p-p), 75 ohm, negative sync

C:0.286 V (p-p) (burst signal), 75 ohm Video/audio input (2) Video: 1 V (p-p), 75 ohm, negative sync

 

Audio: 500 mV (rms)

Component input (2)

Y: 1 V (p-p), 75 ohm, including sync

 

Pr/Cr: ±0.35 V (p-p), 75 ohm

 

Pb/Cb: ±0.35 V (p-p), 75 ohm

 

Audio: 500 mV (rms)

 

Suggested resolutions: 1080P, 1080i, 720p, 480p,

 

480i

HDMI input (5)

5 HDMI input jacks

 

HDCP compliant

 

E-EDID compliant

 

Suggested scan rates: 1080p, 1080i, 720p, 480p,

 

480i

VGA input

E-EDID compliant

 

Suggested scan rates: 640x480/60 Hz,

 

800x600/60 Hz, 1024x768/60 Hz,1280x1024/60 Hz

 

1680x1050/60 Hz,1920x1080/60 Hz

 

Audio input: Headphone mini-jack for stereo

Accessories

Remote control and batteries (2 AA)

 

Remote control holder

 

AC power cord

 

Component cable

 

Cleaning cloth

 

User guide

 

Quick Setup Guide

 

 

50

www.insigniaproducts.com