To connect an outdoor antenna:

1Turn off your TV and all connected equipment.

2If your antenna cable has a coaxial connector, connect the cable to the ANTENNA/CABLE DIGITAL/ANALOG jack on the back of your TV.

Or,

If your antenna cable has a twin-lead connector, connect the cable to a coaxial-to-twin-lead

(300-75 ohm) adapter (not included), connect the adapter to a coaxial cable, then connect the other end of the coaxial cable to the ANTENNA/CABLE DIGITAL/ANALOG jack on the back of your TV.

3Connect the other end of the cable to the antenna jack.

Connecting cable TV

Your TV has a coaxial jack for connecting cable TV.

Some cable TV providers scramble the signals for “premium” (pay) channels. To view these channels, you need a converter/descrambler box.

If you do not require a converter/descrambler box, you can connect your cable TV directly to your TV. For more information, see “No converter/descrambler box” on page 10.

If you require a converter/descrambler box, you can connect your cable TV using an RF switch (not included). For more information about connecting a converter/descrambler box, see “With converter/descrambler box” on page 10 and contact your cable TV provider.

You can also connect cable TV using an HDMI, component video, S-Video, or AV connection, depending on your cable box. For more information, see “Connecting cable TV via a cable TV box” on page 10.

No converter/descrambler box

To connect cable TV without a converter/descrambler box:

1Connect one end of a coaxial cable to the coaxial jack on the back of your TV.

2Connect the other end of the cable to the cable TV wall outlet.

With converter/descrambler box

If your cable box descrambles only some channels (such as premium channels), you need a two-way splitter, an RF (A/B) switch, and four lengths of antenna cable. The two-way splitter and RF switch are not provided.

To connect cable TV with a converter/descrambler box:

Use the following illustration as a guide to connect a converter/descrambler box.

Set the RF switch to the A position to tune to unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls.

 

RF switch

 

 

 

 

 

Two-set signal splitter

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

Out

 

 

 

 

 

In

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV

Cable converter/descrambler box

Connecting cable TV via a cable TV box

1Connect the incoming cable from the cable wall jack to the cable-in jack on the cable box.

2Depending on the jacks available on the cable box, connect a cable from the outgoing jacks on the cable box to the corresponding jacks on the back of your TV. The connection can be to the cable-out, HDMI, component video, S-Video, or AV jack.

Back of TV

ANTENNA

IN

OUT

Cable box

HDMI

Video or S-Video

Component

3If you use a component video, S-Video, or AV cable, connect an audio cable to the corresponding jacks on the back of your TV and on the cable box.

10

www.insigniaproducts.com