
3Press to highlight an option, then press OK/ENTER to open the
•Audyssey Dynamic
•SRS TruSurround
Note
If you set the SRS TruSurround HD to On, Audyssey Dynamic Volume will be set to Off automatically.
•
•
•
•Digital
•Audio
•
•
•
•
•Reset Audio Settings— Reset all audio settings to factory defaults. When you select this option, a confirmation box opens. Press or
to select Yes or No, then press OK/ENTER to confirm.
4Press or
to modify a scale or to move from left to right to make a choice in a submenu.
Press or
to move up or down when selecting from a list of choices in a submenu.)
5Press MENU to go to the previous menu or EXIT to close the menu.
Playing TV audio only
When watching TV, you can turn off the TV picture and listen to the audio only.
To play TV audio only:
1Press MENU. The
PICTURE | AUDIO CHANNELS SETTINGS |
Picture |
|
Mode | Vivid |
Brightness | 42 |
Contrast | 45 |
Color | 54 |
Tint | 0 |
Sharpness | +5 |
OK | MENU PREVIOUS | EXIT EXIT |
MOVE ENTER SELECT |
Adjust settings to affect picture quality
2Press or
to select CHANNELS. The Channels menu opens.
| PICTURE | AUDIO CHANNELS SETTINGS |
| |
Channels |
|
|
|
|
Auto Channel Search |
|
|
| |
|
|
| ||
Add/Skip Channels |
|
|
|
|
Favorites |
|
|
|
|
Channel Labels |
|
|
|
|
Channel Strength |
|
|
|
|
Audio Only | OK |
| Off |
|
|
| |||
MOVE | MENU PREVIOUS | EXIT EXIT |
| |
ENTER SELECT |
|
Adjust channel options
3Press to highlight Audio Only, then press OK/ENTER or
to access the
4Press or
to select On or Off.
Note
•After the Audio Only is set to On, the picture disappears within 5 seconds after the
•Audio Only works only when the input source is TV and your TV is receiving a broadcast signal.
•To exit Audio Only mode, press any button. When you exit Audio Only mode, the Audio Only option is automatically reset to Off.
20 | www.insigniaproducts.com |