Insignia NS-LCD15 Using your TV, Changing channels, Turning your TV on and off, Setting up the channel list, Selecting the TV signal source, Selecting a digital sub-channel

		Insignia NS-LCD15 15” LCD TV
4 Press the INPUT button repeatedly to select		Automatically setting up channels
	the VIDEO5 input source, then press PC to	To automatically set up the channel list:
	toggle from HDMI to VGA.
		1 Press the MENU button. The Main on-screen
		display menu opens with Setup highlighted.

TV

RS-232 (for service)

RS-232

ENTER

Audio cable VGA cable

2Press the button to enter the sub-menu, then or button to highlight Auto Ch Search.

3Press ENTER or to start the search.

Using your TV

Turning your TV on and off

To turn your TV on and off:

1Make sure that the power cord is connected to your TV and a power outlet.

2Press the POWER button to turn on your TV. The power indicator LED turns green.

3Press the POWER button again to return your TV to standby. The power indicator LED turns orange.

Selecting the TV signal source

To select the TV signal source:

•With the TV on, press the INPUT button on either the TV or the remote to choose from: ANT (antenna)

•Video1 (composite)

•Video2 (S-Video)

•Video3 (component)

•Video4 (VGA - computer)

•Video5 (HDMI)

If you select Video1, press the VIDEO button to choose between composite and S-Video.

Note

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Setting up the channel list

After you select your TV source, if you selected antenna or cable you need to set up the channel list. When you set up your channel list, your TV searches for all available channels in your area and stores a list of these channels. When you press the CH – or CH + buttons, your TV skips the channels that do not have a signal.

Note

You can press the Exit button to stop the search.

Manually adding or deleting channels from the channel list

After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the channel list.

To add or delete channels:

1Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted.

2Press the button to enter the sub-menu, then or to highlight Manual Channel Set. The Channel Setup Table opens.

3Press the or button to select a channel, then press then press ENTER to toggle between viewable and not viewable.

4Press MENU or EXIT to close the menu.

Changing channels

To change channels:

•Press the CH – or CH + button on the remote control to go to the next lower or higher channel.

Or

Press the number buttons to directly select a channel (for example, if you want channel 83, press 8, then press 3).

Or

Press the RECALL button to go to the last viewed channel.

Selecting a digital sub-channel

Most digital TV channels have more than one channel. The main channel carries the signal for the main TV program. The sub-channels carry signals for additional or alternate programming, such as a radio or news broadcast.

8 www.insignia-products.com