Insignia
Setting up the channel list | Selecting a digital |
After you select your TV source, if you selected antenna or cable you need to set up the channel list. When you set up your channel list, your TV searches for all available channels in your area and stores a list of these channels. When you press CH 
or CH 
, your TV skips the channels that do not have a signal.
Automatically setting up channels
To automatically set up the channel list:
1Press MENU. The
ENTER
2Press 
to enter the 
or 
to highlight Auto Ch Search.
3Press ENTER or 
to start the search.
Note
You can press Exit to stop the search.
Manually adding or deleting channels from the channel list
After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the channel list.
To add or delete channels:
1Press MENU. The
2Press 
to enter the 
or 
to highlight Manual Channel Set. The Channel Setup Table opens.
3Press 
or 
to select a channel, then press ENTER to toggle between viewable and not viewable.
4Press MENU or EXIT to close the menu.
Changing channels
To change channels:
•Press CH 
or CH 
on the remote control to go to the next lower or higher channel.
Or
Press the number buttons to directly select a channel (for example, if you want channel 83, press 8, then press 3).
Or
Press 
RECALL to go to the last viewed channel.
Most digital TV channels have more than one channel. The main channel carries the signal for the main TV program. The
For example, if the main channel number is 8, the
To select a
1Press the number buttons for the main channel (for example 8).
2Press
Adjusting the volume
To adjust the volume:
•Press VOL – or VOL + to decrease or increase the volume.
•Press MUTE to turn off the sound. Press MUTE again to turn the sound back on.
Displaying status information
To display status information:
•Press DISPLAY. Your TV displays status information, such as the channel number or signal source.
Checking the DTV signal strength
To check the DTV signal strength:
1Press MENU. The
2Press 
to enter the 
or 
to highlight DTV Signal. The DTV signal meter opens.
3Press MENU or EXIT to close the menu.
Adding a channel label
To add a label to a channel:
1Press MENU. The
2Press 
to enter the 
or 
to highlight Channel Labels. The Channel Label menu opens.
3Press 
or 
to move the cursor to the channel field, then press 
or 
to select a channel.
4Press 
or 
to move the cursor to the label field, then press 
or 
to select the character.
5Press ENTER to return to the previous menu.
8 |