Insignia NS-LCD19-09 manual 6

6Grounding clamp

7Antenna lead-in wire

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for correct grounding and in particular, specifies that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.

Mobile telephone warning

To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless or cellular telephones away from the TV.

Non-active pixels

The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few nonactive pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.

Features

Front

		1
		2
		3
		4
		5
		6
		7
#	Button	Description
1	VOL+	Press to increase the volume. In Menu
		mode, functions as the right arrow to
		go to the next menu or increase a
		setting.
2	VOL–	Press to decrease the volume. In Menu
		mode, functions as the left arrow to go
		to a previous menu or decrease a
		setting.
3	CH	Press to go to the next higher channel.
		In Menu mode, functions as the up
		arrow.
4	CH	Press to go to the next lower channel.
		In Menu mode, functions as the down
		arrow.
5	MENU	Press to show the on-screen menu.
6	INPUT	Press to cycle through the available
		input sources. In Menu mode,
		functions as the ENTER button.
7	POWER	Press to turn on your TV or put it into
		Standby mode.

Insignia NS-LCD19-09 19" LCDTV 720P

Remote control

1	INPUT DISPLAY	POWER
2		18

3VIDEO COMP HDMI TV 19

41 2 3 20

	5	4	5	6
		7	8	9
				RECALL
	6		0		21
	7		MUTE
		VOL		CH	22
	8
			FAVORITE
					23
	9	VOL		CH
					24
	10
		MENU		EXIT	25
	11		ENTER
	12
	13	P-LOCK	MTS/SAP	CCD	26
		ZOOM	SLEEP	FREEZE
	14				27
	15	PICTURE		AUDIO	28
	16
	17
			ZRC-101
#	Button		Description
1	POWER		Press to turn on your TV or put it
			into Standby mode.
2	INPUT		Press to select the video input
			signal source.
3	DISPLAY		Press to display status
			information.
4	VIDEO		Press to toggle between S-Video
			and composite source modes.
5	Number buttons		Press to enter channel numbers. In
			the on-screen menu, press to enter
			your parental control password.
6	–		Use with the 0-9 number buttons
			and ENTER button to select digital
			channels.
7	VOL +		Press to increase the volume.
8	MUTE		Press to mute the sound. Press
			again to restore the sound.
9	VOL –		Press to decrease the volume.
10	MENU		Press to open the on-screen menu.
11			Press to move down, up, left, or
			right in the on-screen menu.
12	ENTER		Press to confirm changes or to
			turn options on and off in the
			on-screen menu.
13	P.LOCK		Press to activate or deactivate
			parental controls. See “Setting
			parental controls” on page 9 for
			information on setting up parental
			controls.

4 www.insignia-products.com