Insignia NS-LCD19-09 15

Insignia NS-LCD19-09 19" LCDTV 720P
Symptom	Possible solution		To attach a wall mount bracket to your TV:
Symptom	Possible solution		1 Remove the four M4 screws holding your TV
“Ghost” or double image	•	This may be caused by	1 Remove the four M4 screws holding your TV
“Ghost” or double image	•	This may be caused by	to the stand.
		obstructions to the antenna,
		such as high-rise buildings or		M4 screws
		hills. Using a highly directional		M4 screws
		hills. Using a highly directional		100 mm
		antenna may improve the		100 mm
		antenna may improve the
		picture quality.
Picture has a few bright	•	A few bright or dark dots on an
or dark dots		LCD screen is normal. It does
		not affect the operation of this		Attach wall	mm
		TV.		Attach wall
		TV.		bracket here
Remote control does not	•	Press TV.			100
work	•	Replace the batteries. Make
		sure that the + and – symbols
		on the batteries align with the +
		and – symbols in the battery
		compartment.
	• Clean the remote sensor on the
		front of your TV.
	• Bright or fluorescent lighting
		may interfere with the remote	M4 screws
		control signal. Turn off the light
		or move your TV.
Snowy picture or noise	•	Make sure that the A/V and
		antenna cables are connected	2 Remove the scew from the bottom of the
		correctly and securely.	2 Remove the scew from the bottom of the
VGA picture is not stable	•	Make sure that you have	base.
VGA picture is not stable	•	Make sure that you have
or synchronized		selected the correct VGA mode
		on your computer.
No output from one of	•	Adjust the balance in the Sound
the speakers		menu.
Control buttons do not	•	Unplug the power cord, wait a
work		few seconds, then plug the cord
		back in and turn on your TV.
After images appear	•	Do not display a still image,
		such as a logo, game, or
		computer image, for an
		extended period of time. This
		can cause a permanent after	Screw
		image to be burned into the	Screw
		image to be burned into the
		screen. This type of damage is	3 Secure the wall mount bracket to the back of
		not covered by your warranty.	3 Secure the wall mount bracket to the back of
		not covered by your warranty.	your TV using one M4 screw, as indicated in
			your TV using one M4 screw, as indicated in
Appendix			the illustration in Step 1.
Appendix			Specifications
Wall-mount hardware (sold separately) lets you			Specifications
mount your TV on a wall.			Design and specifications are subject to change
For detailed information on mounting your TV on			without notice.
a wall, see the instructions provided with the
wall-mount hardware.			Analog standard	NTSC
Contact a technician for assistance when			Digital standard	ATSC, 8-VSB, Clear-QAM
installing the wall-mount bracket. Best Buy is not			Digital standard	ATSC, 8-VSB, Clear-QAM
installing the wall-mount bracket. Best Buy is not			Screen	19-inch
responsible for any damage to your TV or injury			Screen	19-inch
to yourself or others.			Channel coverage	VHF: 2-13
We suggest that you keep your TV at least				UHF: 14-69
2.36 inches (60 mm) from the wall to prevent				CATV: Mid band - A-8 ~ A-1, A ~ I
cable interference.				Super band - J ~ W
				Hyper band - AA ~ ZZ, AAA, BBB
				Ultra band - 65 ~ 94, 100 ~ 135
			Power source	AC 100~240 V 50/60 Hz
			Power consumption	<60 W
				<1 W in standby mode
			Audio power	3 W + 3 W internal speaker
			S-Video input	Y:1 V(p-p), 75 ohm, negative sync
				C:0.286 V(p-p) (burst signal), 75 ohm
			Video/audio input	Video:1 V(p-p), 75 ohm, negative sync
				Audio:500 mV(rms)