Insignia NS-LCD26-09 26" LCDTV

Selecting the TV signal source

3

Press or to select a channel, then

 

To select the TV signal source:

 

press ENTER to toggle between viewable

 

 

and not viewable.

 

• With the TV on, press INPUT on either the

4

Press MENU or EXIT to close the menu.

 

 

TV or the remote to choose from:

 

 

•TV

•Composite

•S-Video

•Component

•VGA

•HDMI1

•HDMI2

Press VIDEO to choose between Composite and S-Video.

Note

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Setting up the channel list

After you select your TV source, if you selected antenna or cable you need to set up the channel list. When you set up your channel list, your TV searches for all available channels in your area and stores a list of these channels. When you press CH or CH , your TV skips the channels that do not have a signal.

Changing channels

To change channels:

•Press CH or CH on the remote control to go to the next lower or higher channel.

Or

Press the number buttons to directly select a channel (for example, if you want channel 83, press 8, then press 3).

Or

Press RECALL to go to the last viewed channel.

Selecting a digital sub-channel

Most digital TV channels have more than one channel. The main channel carries the signal for the main TV program. The sub-channels carry signals for additional or alternate programming, such as a radio or news broadcast.

For example, if the main channel number is 8, the sub-channel number might be 8-1, 8-2, or 8-3.

Automatically setting up channels

To automatically set up the channel list:

1Press MENU. The on-screen display menu opens with Setup highlighted.

To select a sub-channel:

1Press the number buttons for the main channel (for example 8).

2Press –, then press the sub-channel button (for example 1).

ENTER

2Press to enter the sub-menu, then press or to highlight Auto Ch Search.

3Press ENTER or to start the search.

Note

You can press Exit to stop the search.

Manually adding or deleting channels from the channel list

After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the channel list.

To add or delete channels:

1Press MENU. The on-screen display menu opens with Setup highlighted.

2Press to enter the sub-menu, then press or to highlight Manual Channel Set. The Channel Setup Table opens.

Adjusting the volume

To adjust the volume:

•Press VOL – or VOL + to decrease or increase the volume.

•Press MUTE to turn off the sound. Press MUTE again to turn the sound back on.

Displaying status information

To display status information:

•Press DISPLAY. Your TV displays status information, such as the channel number or signal source.

Checking the DTV signal strength

To check the DTV signal strength:

1Press MENU. The on-screen display menu opens with Setup highlighted.

2Press to enter the sub-menu, then press or to highlight DTV Signal. The DTV signal meter opens.

3Press MENU or EXIT to close the menu.

8

www.insignia-products.com