Insignia NS-LCD26-09 Appendix, Specifications

Insignia NS-LCD26-09 26" LCDTV
Symptom	Possible solution		To attach a wall mount bracket to your TV:
			1 Remove the four M4 screws holding your TV
“Ghost” or double image	•	This may be caused by
			to the stand.
		obstructions to the antenna,
		such as high-rise buildings or		200 mm	M4 screws
		hills. Using a highly directional
		antenna may improve the
		picture quality.
Picture has a few bright	•	A few bright or dark dots on an
or dark dots		LCD screen is normal. It does
		not affect the operation of this		Attach wall		mm
		TV.		bracket here
						100
Remote control does not	•	Press TV.
work	•	Replace the batteries. Make
		sure that the + and – symbols
		on the batteries align with the +
		and – symbols in the battery
		compartment.
	• Clean the remote sensor on the
		front of your TV.
	• Bright or fluorescent lighting
		may interfere with the remote	Remove M4 screws
		control signal. Turn off the light
		or move your TV.
Snowy picture or noise	•	Make sure that the A/V and
		antenna cables are connected		Remove stand
		correctly and securely.	2 Remove the four screws from the bottom of
VGA picture is not stable	•	Make sure that you have
			the base.
or synchronized		selected the correct VGA mode
		on your computer.
No output from one of	•	Adjust the balance in the Sound
the speakers		menu.
Control buttons do not	•	Unplug the power cord, wait a
work		few seconds, then plug the cord
		back in and turn on your TV.
After images appear	•	Do not display a still image,
		such as a logo, game, or
		computer image, for an
		extended period of time. This
		can cause a permanent after
		image to be burned into the
		screen. This type of damage is	3 Secure the wall mount bracket to the back of
		not covered by your warranty.	your TV using three M4 screws, as indicated
Appendix			in the illustration in Step 1.
			Specifications
Wall-mount hardware (sold separately) lets you
mount your TV on a wall.			Design and specifications are subject to change
For detailed information on mounting your TV on			without notice.
a wall, see the instructions provided with the
wall-mount hardware.			Analog standard	NTSC
Contact a technician for assistance when			Digital standard	ATSC, 8-VSB, Clear-QAM
installing the wall-mount bracket. Best Buy is not			Screen	26-inch
responsible for any damage to your TV or injury
to yourself or others.			Channel	VHF: 2-13
We suggest that you keep your TV at least			coverage	UHF: 14-69
2.36 inches (60 mm) from the wall to prevent				CATV: Mid band - A-8 ~ A-1, A ~ I
cable interference.				Super band - J ~ W
Before you wall-mount your TV, you need to				Hyper band - AA ~ ZZ, AAA, BBB
				Ultra band - 65 ~ 94, 100 ~ 135
remove the base.
			Power source	AC 100~240 V 50/60 Hz
			Power	<120 W
			consumption	<1 W in standby mode
			Audio power	5 W + 5 W internal speaker
			S-Video input	Y:1 V(p-p), 75 ohm, negative sync
				C:0.286 V(p-p) (burst signal), 75 ohm
			Video/audio	Video:1 V(p-p), 75 ohm, negative sync
			input	Audio:500 mV(rms)

www.insignia-products.com 13