Insignia
For | Connecting a computer | |
into the HDMI1 or HDMI2 (1) jack on the back | You can connect a computer using the HDMI or | |
of your TV, then plug the other end into an | ||
VGA jack on the back of your TV. | ||
HDMI device. | ||
| ||
| Warning | |
| Make sure that you turn off and unplug your TV | |
| before installing devices. | |
| Note | |
| When the computer goes into standby mode, your | |
| TV turns off. If your TV does not turn on when you | |
| “wake” your computer, press the POWER button | |
| on your TV or remote control. |
To connect a computer using VGA:
1 Plug a VGA cable from your computer into the VGA jack on the back of your TV.
1
PC IN
| 2 | VGA AUDIO | 5 |
| AV IN |
| |
| SPDIF | 6 | |
|
| ||
3 | ANTENNA / CABLE |
| |
DIGITAL / ANALOG |
|
| |
| 4 | Pr Pb | 7 |
2Turn on your TV.
3Press INPUT repeatedly to select the external signal source you want to watch.
4Turn on external signal source.
5Insert a disc or videotape into the external signal source, then press PLAY.
PC IN
VGA AUDIO
VGA cable | Audio cable |
2Plug an audio cable from your computer’s audio out jack into the AUDIO jack on the back of your TV.
3Plug in and turn on your TV.
4Press INPUT repeatedly to select the VGA input source.
To connect a computer using HDMI:
•Plug an HDMI cable into the HDMI INPUT jack on the back of your TV and into the HDMI Out jack on the back of the computer.
Using your TV
Turning your TV on and off
To turn your TV on and off:
1Make sure that the power cord is connected to your TV and a power outlet.
2Press 
to turn on your TV. The power indicator LED turns blue.
3Press 
again to return your TV to standby. The power indicator LED turns red.
7 |