Insignia NS-P4112 Portable CD Player

7Press the button to start playing your playlist.

8To cancel the playlist, press the button twice,

Or

Press the button, then press and hold the PROG. button for three seconds.

Note

CD playback must be stopped to program a playlist.

If you want to play your playlist repeatedly, press the MODE button one or more times until ALL appears on the display.

Using bass boost

Your CD player has a DBBS (dynamic bass boost sound) feature that lets you enhance the bass during playback.

Note

Because bass volume changes during playback, using bass boost at a high volume level may produce distorted sound. If this happens, lower the volume level until the distortion disappears.

To enhance the bass:

1Slide the DBBS switch to the ON position. Your CD player enhances the bass.

2Slide the DBBS switch to the OFF position to play the bass normally.

Using the anti-shock feature

When your CD player moves during playback (for example, when your are walking or in a moving vehicle), your player may be subject to bumps or vibrations.

When you press the button, the anti-shock feature turns on automatically and appears on the display. The CD spins faster and your CD player stores the audio in memory to make sure that playback does not pause or skip. If your player is bumped or vibrated

too much, the memory buffer gets full and appears on the display. If the memory buffer is full, playback may skip or pause. After the bumping or vibration stops, your player resumes normal playback.

Note

You should use the anti-shock feature only when necessary. Using the anti-shock feature while your CD player is running on battery power uses additional battery power. To turn off the anti-shock feature, press the ESP button.

The anti-shock feature will not correct playback errors if the CD is scratched or dirty.

www.insignia-products.com13