Insignia
Connecting cable TV | To connect your antenna or digital cable TV |
Your TV has a 75 ohm AIR/CABLE IN jack for | through your VCR |
| |
connecting cable TV. |
|
Some cable TV providers scramble the signals
for “premium” (pay) channels. To view theseTV channels, you need a converter/descrambler
box.
If you do not have a converter/descrambler box, you can connect your cable TV directly to your TV. If you have a converter/descrambler box, you can connect your cable TV using an RF switch (not supplied). For more information about connecting a converter/descrambler box, contact your cable TV provider.
To connect cable TV without a converter/descrambler box:
1Connect one end of a 75 ohm cable to the AIR/CABLE IN jack on the back of your TV.
2Connect the other end of the cable to the cable TV wall outlet.
To connect cable TV with a converter/descrambler box:
•Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.)
Set the RF switch to the A position to watch unscrambled channels controlled by your TV remote control. Set the RF switch to the B position to watch scrambled channels controlled by the converter/descrambler controls.
RF switch |
A 
B
Out 
In
TV cable wall | VCR |
jack or antenna |
|
Connecting external equipment
Connecting a VCR
Back of
TV
Audio | |
cable | cable |
TV
Cable converter/descrambler box
To connect digital cable TV
Back of TV
TV cable wall jack or antenna
AV cable
VCR
To connect a VCR:
1Plug an RCA composite video cable (yellow) into the video out jack of the VCR, then into the VIDEO1 IN (yellow) jack on the back of your TV.
-OR -
Plug an
2Plug RCA audio cables into the VCR’s audio output jacks, then into the VIDEO1 IN (for video cable), or
3Press 
to turn on your TV.
4 Press INPUT, press
or to select VIDEO1 or
11 |