Insignia NS-PDP50HD-09 50" PDP TV

To connect AV equipment with an HDMI

3 Press INPUT, press or to select HDMI1

cable:

 

 

 

 

or HDMI2 (rear), or HDMI3 (side), then press

1 Plug an HDMI cable into the HDMI out jack of

 

ENTER to confirm.

 

the AV equipment, then into the HDMI1 IN or

 

 

 

HDMI2 IN jacks on the back of your TV, or the

 

Note

 

HDMI3 IN jack on the side of your TV.

 

To connect your TV to the AV equipment’s DVI

2

Press

to turn on your TV.

 

output, you need an HDMI-to-DVI cable or an

 

HDMI adapter (not supplied) and audio cables.

3

Press INPUT, press or to select HDMI1

 

 

Connecting a PC

 

or HDMI2 (rear), or HDMI3 (side), then press

 

 

 

 

ENTER to confirm.

For information on connecting a PC to your TV

 

 

 

 

 

with a DVI cable, see “Connecting AV equipment

 

 

 

 

 

with a DVI connector” on Page 14.

 

Note

 

 

 

 

The HDMI cable provides both video and audio

Back of TV

 

signals, so it is not necessary to connect

 

 

 

 

additional audio cables for sound.

 

 

 

 

 

 

 

 

 

Connecting AV equipment with a DVI connector

This connection can be used to connect a digital video source, such as a PC, digital-capable DVD, or digital set-top box, to your TV.

Back of TV

Side of TV

Audio cable

VGA cable

PC

DVI-to-HDMI cable

DVI output

Audio cable

AV equipment

To connect AV equipment with an

HDMI-to-DVI cable:

1Plug the DVI connector of an HDMI-to-DVI cable into the DVI out jack of the AV equipment, then plug the HDMI connector into the HDMI1 IN or HDMI2 IN jacks on the back of your TV, or the HDMI3 IN jack on the side of your TV.

•Plug RCA audio cables into the audio output jacks of the AV equipment, then into the HDMI AUDIO L (white) and AUDIO R (red) jacks on the back of your TV, or the VIDEO2 IN AUDIO L (white) and AUDIO R (red) jacks on the side of your TV (if you use the HDMI3 IN jack for the video).

2Press to turn on your TV.

To connect a PC:

1Plug a VGA (D-sub 15-pin) cable into the VGA (RGB) output jack on your PC, then into the PC IN VGA jack on the back of your TV.

2Plug an audio cable into the audio output jack on your PC, then into the PC IN AUDIO L (white) and AUDIO R (red) jacks on the back of your TV.

3Turn on your TV and the PC.

4Press INPUT, press or to select PC (VGA), then press ENTER to confirm.

Notes

•In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the VIDEO menu until the picture is clear.

•Avoid keeping a fixed image on the screen for a long period of time. The fixed image could become permanently imprinted on the screen.

•Depending on your graphics card, some resolution settings may not allow the image to be positioned on the screen correctly.

14

www.insignia-products.com