1
www.insigniaproducts.com
Insignia NS-R2001
AM/FM Stereo Receiver
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-R2001 represents the
state of the art in stereo receiver design and is
designed for reliable and trouble-free performance.
Safety information
Electric shock warning
Ventilation
Power cord
Important safety instructions
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this apparatus near water.
6Clean only with dry cloth.
7Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
Warning
To reduce the risk of electric shock, do not remove
the cover or back. There are no user-serviceable parts
inside. Refer servicing to qualified service personnel.
This lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous
voltage within your receiver’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying your receiver.
Warning
To prevent fire or electric shock hazard, do not
expose this receiver to rain or moisture.
Caution
Your receiver should not be exposed to water
(dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on your
receiver.
Caution
Do not block any ventilation openings. Install in
accordance with these instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of your
receiver and to protect it from over-heating.
The openings should never be blocked by placing
your receiver on a bed, sofa, rug, or other similar
surface. This receiver should not be placed in a
built-in installation such as a bookcase or rack unless
correct ventilation is provided or these instructions
have been adhered to.
CAUTI
ON
Risk of Electric Shock
Do Not Open
Caution
We recommend that most appliances be placed
upon a dedicated circuit—a single outlet circuit
which powers only that appliance and has no
additional outlets or branch circuits. Check the
specification page of this manual for power
requirements.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in electric shock or fire.
Periodically examine your receiver cord, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of your receiver, and have
the cord replaced with an exact replacement part by
an authorized service provider.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
your receiver.
To disconnect power from the outlet, pull out the
plug. When installing your receiver, make sure that
the plug is easily accessible.