Insignia NS-RTV32 Using your television

									NS-RTV32 32-inch MTS Stereo Color TV
3		Press		or	to select the SETUP menu,			Note the following:
		then press			or	to select ADD/DELETE.		• If a channel is selected with only audio
4		Press		or	. The ADD/DELETE menu			content, “AUDIO ONLY” will be displayed on
		appears.						the screen.
5		Press		or	to select ADDING			• If a channel is selected with a weak digital
		CHANNEL, then press or .						signal, “DIGITAL CHANNEL SIGNAL
6		Press EXIT to return to the normal screen.						STRENGTH IS LOW” will be displayed on the
7		Repeat step 1-6 for other digital channels you						screen.
								• If a channel is selected to which you have not
		want to add.
Using clear all								subscribed, “DIGITAL CHANNEL IS
								SCRAMBLED” will be displayed on the
	All channels can be deleted from the channel
								screen.
	memory.
	To clear all channels from memory:							TV		Cable
1		Press MENU. The menu screen appears.
								VHF		VHF
2		Press		or	to select the SETUP menu,
							2-13			2-13
		then press			or	to select ADD/DELETE.
3		Press		or	. The ADD/DELETE menu			UHF		STD/HRC/IRC
		appears.					14-69			14-36 (A) (W)
4		Press		or	to select CLEAR ALL, then					37-59 (AA) (WW)
		press		or .						60-85 (AAA) (ZZZ)
Using your television										86-94 (86) (94)
										95-99 (A-5) (A-1)
										100-125 (100) (125)
										01 (5A)
	Notes		• If you select a channel with no
				broadcast signal, the sound is			Seeking channels
				automatically muted.
			• If a station you are viewing stops				To seek the next channel:
				broadcasting, the television				Press and release CH or . The channel
				automatically shuts itself off after 15
				minutes.				automatically stops at the next channel set into
								memory.

To use the television:

1Press POWER to turn on the television.

2Adjust the volume level by pressing VOL + or –. The volume level is indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.

For proper operation, before seeking channels, they should be set into the memory. See “Memorizing channels” on page 9.

Viewing information

Note The screen automatically returns to normal TV operation after 10 seconds.

3Set the TV/CABLE menu option to the appropriate position (see “Selecting TV or cable” on page 9).

4Press the direct channel selection buttons to select the channel.

Selecting analog channels

Channels	Press
1-9	Press 0 twice, then 1-9 as needed.
	Example: to select channel 2, press
	0 0 2.
10-99	Press 0, then the remaining 2 digits.
	Example, to select channel 12, press
	0 1 2.
100-125	Press the 3 digits in order. Example,
	to select channel 120, press 1 2 0.

Selecting digital channels

Press the first 3 digits, then press the –/DISPLAYbutton, followed by the remaining 3 digits.

Example, to select channel 015-001, press 0 1 5

– 0 0 1.

To view program information:

1Press -/DISPLAYto display the current information on the screen.

When the television receives a digital signal, the digital information appears:

•Broadcast program name

•Station name

•Remaining time

•Audio language

•Program name

•V-Chip rating

•V-Chip mark

•Closed caption mark

When the television receives an analog signal, -/DISPLAYshows only analog information.

2Press -/DISPLAYagain. The analog information appears.

•Clock

•Channel number or video mode selected

•Channel label (if preset)

•Stereo or SAP (second audio program) audio status

•Content rating

10 www.insignia-products.com