NS-RTV32 32-inch MTS Stereo Color TV

•On timer, Off timer, Sleep time (if preset)

•Picture size

3Press -/DISPLAYagain to clear the call display.

Viewing the previous channel

The QUICK VIEW button allows you to go back to the last channel viewed. Press QUICK VIEW again to return to the last channel you were watching.

Muting the volume

Press MUTE to turn off the sound. The television’s sound is silenced and MUTE appears on the screen. The sound can be switched back on by pressing this button again or by pressing one of the VOL + or – buttons.

Using sleep

To set the television to turn off after a preset amount of time, press SLEEP on the remote control. The clock counts up ten (10) minutes for each press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m).

After the sleep time is programmed, the display appears briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time is displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0h00m.

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to TV rating and movie rating if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must set a password.

Notes

• The V-Chip function is activated only

 

on programs and input sources that

 

have the rating signal.

 

• It may take several minutes to

 

complete the initial V-Chip setup.

 

• The V-CHIP SET (DTV) will only be

 

selectable when the TV receives a

 

digital broadcast using the new rating

 

system. Currently, some stations are

 

still not providing this signal. If the

 

signal is not provided, V-CHIP SET

 

(DTV) function will not be available.

 

• If you forget the password, contact

 

Customer Service at 1-877-467-4289

 

for assistance. Your original remote

 

control is required.

 

• To avoid forgetting the password, write

 

it down and keep it in a safe place.

 

 

Setting a password

To set a password:

1Press MENU. The menu screen appears.

2Press or to select the LOCKS menu.

3Press or to display the password entering mode.

4Select and enter a password (4 digits) using the number buttons (0-9), then press ENTER.

5Enter the same password again to confirm, then press ENTER.

The password is now set and the V-Chip menu appears on the screen.

Setting the V-Chip

To set the V-Chip:

1Press MENU. The menu screen appears.

2Press or to select the LOCKS menu.

3Press or to display the password entering mode. Use number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears.

4Press or to select V-CHIP SET, then press . The V-CHIP SET menu appears.

5Press or to select TV RATING, then press or to display the desired rating. OFF—TV RATING is not set

TV-Y—All children TV-Y7—7 years old and above TV-G—General audience TV-PG—Parental guidance TV-14—14 years old and above TV-MA—17 years old and above

When you select TV-Y7, TV-PG, TV-14, or TV-MA, press -/DISPLAYto further define the

rating. Press or to select the desired

rating you want. Press or to select the setting ON or OFF.

6Press or to select MOVIE RATING, then press . The RATING menu appears.

7Press or to select the rating, then press or to select ON or OFF for each rating.

G—All ages

PG—Parental guidance

PG-13—Parental guidance less than 13 years old

R—Under 17 years old parental guidance suggested

NC-17—17 years old and above X—Adult only

8Press MENU twice to return to the LOCKS menu, then press or to select V-CHIP.

9Press or to select ON. Your settings are now set into memory.

10Press EXIT to return to the normal screen.

Watching a protected show

To watch a program that is blocked by the V-Chip:

1Press MUTE.

2Enter the password, then press ENTER.

After you enter the password correctly, the protection is temporarily overridden. If the television is turned off, or if the channel is changed, the V-Chip restriction is reactivated.

Changing the password

To change the password:

1Press MENU. The menu screen appears.

2Press or to select the LOCKS menu.

3Press or to display the password entering mode. Use the number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears.

www.insignia-products.com

11