Insignia NS-SPBTP1-W Maintaining, Specifications

10
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
www.insigniaproducts.com
Maintaining
• To prevent fire or shock hazard, disconnect your speaker from the AC
wall outlet when cleaning.
• The finish on your speaker may be cleaned with a dust cloth and cared
for as other furniture. Use caution when cleaning and wiping the plastic
parts.
• If the speaker becomes dirty or smudged with fingerprints it may be
cleaned with a soft cloth slightly dampened with a mild soap and water
solution. Never use abrasive cloths or polishes as these will damage the
finish of your speaker.
Specifications
My external audio device
(MP3 player) won't play.
• Make sure that your external device is on and charged.
• Make sure that your external device is not paused or muted.
• Make sure that the audio cable is fully inserted into the external device and the AUX
IN jack on your speaker.
• Make sure that there are songs in your external device.
• Make sure that your external device is working properly before you connect it to your
speaker.
Caution
• Never allow water or other liquids to get inside your
speaker.
• Modifying or tampering with the internal components of
your speaker can cause a malfunction and might
invalidate its warranty. If your speaker is not performing
as it should, take it to the local dealer for assistance.
General
Bluetooth 3.0 + EDR, support A2DP, SBC
Power requirement Built-in battery
Power supply AC 120V~60Hz (built-in 300 mAh Li-ion rechargeable battery)
Battery Built-in 300 mAh Li-ion rechargeable battery to support music playback > 2.5 hours.
Audio output power Typical 3 W
USB port Supports 5 V at 1 A charging current (no audio playback)
Dimensions (HxWxD) 3.7 × 3.7 × 1.4 in (9.5 × 9.5 × 3.5 cm)
Problem Solution