Insignia NS-WD1450, NS-WD1450-C Step 7, Attaching the bottom and the short brace

11
ESPRESSO FINISH CLOSED CABINET TV STAND
www.insigniaproducts.com
Step 7 : Attaching the bottom and the short brace
1Fasten the bottom (F) to the ends (A and B) and the uprights (C and D) with eight black 1-7/8” flat head
screws (FF).
2Fasten the short brace (Q) to the bottom (F), then tighten the two hidden cams (V).
CAUTION: Risk of damage or injury. Hidden cams must be completely tightened. Hidden cams that are not
completely tightened may loosen and parts may separate.
FF
B
D
C
A
F
Q
FF
Surface with
hidden cams
Unfinished
surface
Curved edge
CAUTION
Risk of damage or
injury. Hidden cams
must be completely
tightened. Hidden
cams that are not
completely tightened
may loosen and parts
may separate.
START TIGHTEN
Arrow
Arrow
Maximum
210 degrees
Minimum
190 degrees
You’ll need:
Phillips screwdriver FF (8)
NS-WD1450_NS-WD1450-C_14-0647_MAN_V3_ENG.fm Page 11 Tuesday, June 24, 2014 12:19 PM