Insignia NS-WD1450, NS-WD1450-C - page 15

15
ESPRESSO FINISH CLOSED CABINET TV STAND
www.insigniaproducts.com
Step 11 : Attaching the back
1Carefully turn over your TV stand onto its front edges. Unfold the back (G) and lay it over the unit.
2Make sure the back is centered along all four edges. Push on opposite corners, if required, to make it square.
3Fasten the back (G) to the unit with nails (KK).
Note: Perforations have been provided for access through the back. Carefully cut out the holes, as needed.
CAUTION: Do not stand the unit upright without the back fastened. The unit may collapse.
G
The perforations should
be positioned here
Unfinished surface
You’ll need:
Hammer
KK (20)
NS-WD1450_NS-WD1450-C_14-0647_MAN_V3_ENG.fm Page 15 Tuesday, June 24, 2014 12:19 PM