Insignia NS-WD1450, NS-WD1450-C specifications - page 8

8
ESPRESSO FINISH CLOSED CABINET TV STAND
www.insigniaproducts.com
Step 4 : Attaching the uprights to the top
•Fasten the uprights (C and D) to the underside of the top (E), then tighten the four Sauder twist-lock®
fasteners (U).
To use the Sauder twist-lock® fasteners:
1Insert the dowel end of the fastener into the hole of the adjoining part.
Note: The dowel end of the fastener must remain fully inserted in the hole of the adjoining part while locking the fastener.
2Tighten the fastener with a Phillips screwdriver as tight as possible.
E
D
C
Finished edge
Dowel end
Surface without Sauder
twist-lock® fasteners
Surface with Sauder
twist-lock® fasteners
You’ll need:
Phillips screwdriver
NS-WD1450_NS-WD1450-C_14-0647_MAN_V3_ENG.fm Page 8 Tuesday, June 24, 2014 12:19 PM