NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV

Making connections

Connecting the power cord

To connect the power cord:

1Slide the AC power adapter holder into the holder mounting hole on the back of the TV.

Adapter holder

For

NS-19E430A10

For

NS-22E430A10

Connecting an antenna, cable TV, or satellite TV

To connect an antenna, cable TV, or satellite TV:

1Make sure that your TV is turned off and the power cord is disconnected.

2Connect one end of a coaxial cable to the ANT/CABLE IN jack on the back of your TV, then connect the other end to the antenna, cable TV, or satellite TV jack.

Back of TV

Holder mounting hole

2 Place the AC power adapter into the holder.

AC adapter

Antenna, cable TV, or satellite TV connection

Power cord

3Insert the power cord into the AC adapter, then insert the AC power adapter into the DC IN 12V jack on the back of your TV.

4Plug the power cord into a power outlet.

Warning

•If you wall mount your TV, make sure that you use the AC power adapter holder.

•If you place your TV on a flat surface, such as a table, you do not have to use the AC power adapter holder.

•When your TV is turned off, power is still flowing into it. To completely disconnect power, unplug the power cord.

3Turn on your TV.

4Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select TV. Press OK/ENTER.

Note

You can also press TV on the remote control to select the TV.

10

www.insigniaproducts.com