Changing video input labels
You can change the video input labels to make them easier to identify. The labels appear when you press INPUT to select the video input source.
To change the video input labels:
1Press MENU, then press 
or 
to highlight the Settings icon. The Settings menu appears.
Picture Audio Channel Settings
Settings
Parental Controls
Time
Menu Settings
Maintaining
Cleaning the cabinet
Wipe the front panel and other exterior surfaces of your TV with a soft cloth lightly dampened with lukewarm water. Never use a solvent or alcohol to clean your TV. Do not spray insecticide near your TV. Such chemicals may cause damage and discoloration to the exposed surfaces.
Troubleshooting
Input Labels
Computer Settings
Closed Caption
Reset to Factory
Move ENTEROK Select MENU Previous EXIT Exit Set various TV options.
2Press 
to access the Settings menu.
3Press 
or 
to highlight Input Labels, then
press 
or 
to open the Input Labels screen. When the screen opens, the Input Source column is highlighted.
Picture Audio Channel Settings
Settings • Input Labels
Input Source |
|
| Current Label |
|
|
|
| New Label |
| ||
VGA |
|
|
|
| TV |
|
|
|
| DV |
|
TV |
|
|
|
|
|
|
|
|
| Default |
|
|
|
|
|
|
|
|
|
| |||
AV |
|
|
|
|
|
|
|
|
| Antenna |
|
Move |
|
|
| Yes | No |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
ENTEROK | Select | MENU Previous | EXIT Exit | ||||||||
Create labels for the devices connected to your TV.
4Press 
or 
to highlight the video input source you want to label.
5Press 
or 
to move the cursor to the New Label column, then press 
or 
to highlight a label for the input source.
6Press 
or 
to highlight Yes, then press OK/ENTER. The label is changed.
7Press MENU one or more times to return to the previous menu.
8Press EXIT to close the menu.
Problem
No picture or sound
Picture is OK, but no sound
Sound is OK, but no color
The picture has overlapped images
Picture has snow
Stripes on picture
Bad stereo or SAP sound
Remote control does not work
“Unsupported Mode” appears on the screen
“No Signal” appears on the screen
Image is not clear
Image is not centered
Picture has a few bright or dark dots
Solution
•Check all cable connections.
•Make sure that your TV is turned on.
•Check the volume level and mute setting.
•Check the color control and adjust it.
•Check the program’s color features because it may be a black and white movie.
•Make sure that the antenna is installed correctly. If not, adjust the antenna towards the broadcasting station.
•Check the antenna and its connection. If there are problems, correct them. If all connections are tight, the problem may be with a faulty antenna or cable.
•Check car traffic or neon signs that may disrupt the image.
•Check for interference from other electronic devices, such as radios and televisions, and keep magnetic or electronic devices away from your TV.
•A long broadcast distance or interference from radio waves can cause bad sound reception. Try changing the mode to Mono.
•Remove obstacles between the remote control and the remote control sensor on the front of your TV.
•Point the remote control at your TV’s remote control sensor.
•Install fresh batteries.
•Check the resolution and frequency of your computer, and adjust it to the optimum resolution for your TV: 1360 × 768 at 60Hz
•Make sure that the cable is firmly connected to the computer and TV.
•Adjust the phase control.
•Adjust the horizontal control.
•A few bright or dark dots on an LCD screen are normal. It does not affect the operation of your TV.
32 | www.insigniaproducts.com |