19" 720p LED HDTV/ 22" 1080p LED HDTV

Attaching a wall-mount bracket

2 Place the AC power adapter into the holder.

Warning

These instructions are for use by qualified service personnel only. To reduce the risk of damage or injury, do not wall-mount your TV unless you are qualified to do so.

To attach a wall-mount bracket:

1If the stand is installed, remove the four screws that secure the stand to the TV, then remove the stand.

2Secure the wall-mount bracket (not provided) to the back of your TV using the screws that secured the stand to your TV. These are M4*12 (4 mm diameter and 12 mm screw thread length) screws.

3.937" (100 mm)

3.937" (100 mm)

Connecting the power cord

To connect the power cord:

1Slide the AC power adapter holder into the holder mounting hole on the back of the TV.

Adapter holder

For

NS-19E430A10

For

NS-22E430A10

AC adapter

Power cord

3Insert the power cord into the AC adapter, then insert the AC power adapter into the DC IN 12V jack on the back of your TV.

4Plug the power cord into a power outlet.

Warning

•If you wall mount your TV, make sure that you use the AC power adapter holder.

•If you place your TV on a flat surface, such as a table, you do not have to use the AC power adapter holder.

•When your TV is turned off, power is still flowing into it. To completely disconnect power, unplug the power cord.

Holder mounting hole

www.insigniaproducts.com

5